WFilter deployment with cisco rvs4000 router

4.1

Author:

IMFirewall Software

HomePage:

http://www.wfiltericf.com

This document demonstrators how to deploy WFilter with a cisco rvs4000 router. The network topology diagram:

Figure 1

In such a network, you need to setup a mirroring port in the cisco rvs4000 for monitoring/filtering. The below diagram shows the router's mirroring settings:

Figure 2

As in "Figure 2", the WFilter computer shall be connected "port 2" (Mirror Port); the switch is connected to "port 4" (mirrored source port).

Links

• How to check whether port mirroring is properly configured?
• When to add a blocking adapter?
• Blocking UDP in pass-by deployment
• Homepage of WFilter Deployment