WFilter deployment with Netgear GS748AT switch

4.1

Author:

IMFirewall Software

HomePage:

http://www.wfiltericf.com

This document demonstrators how to deploy WFilter with a Netgear GS748AT switch. The network topology diagram:

Figure 1

Port mirroring settings of the Netgear GS748AT switch:

Figure 2

In this example, port g3(connected to the router) is configured as the "source port", port g2(connected to WFilter) is configured as the "destination port".

The mirroring type shall be "TX and RX".

By now, you are able to monitor all clients internet activity in local network.

Links

• How to check whether port mirroring is properly configured?
• When to add a blocking adapter?
• Blocking UDP in pass-by deployment
• Homepage of WFilter Deployment