WFilter deployment with Linksys SRW224G4 switch

4.1

Author:

IMFirewall Software

HomePage:

http://www.wfiltericf.com

This document demonstrators how to deploy WFilter with a Linksys SRW224G4 switch. The network topology diagram:

Figure 1

Port mirroring settings of the Linksys SRW224G4 switch:

Figure 2

In this example, port e1(connected to the router) is configured as the "source port", port g1(connected to WFilter) is configured as the "target port".

By now, you are able to monitor all clients internet activity in local network.

Links

• How to check whether port mirroring is properly configured?
• When to add a blocking adapter?
• Blocking UDP in pass-by deployment
• Homepage of WFilter Deployment