WFilter deployment with quidway S5012p switch

4.1

Author:

IMFirewall Software

HomePage:

http://www.wfiltericf.com

This document demonstrators how to deploy WFilter with a Huawei Quidway S5012P switch. The network topology diagram:

Figure 1

Please follow below steps to configure port mirroring on quidway S5012p switch:

1. Set port 5 as the destination port:

[Quidway]monitor-port GigabitEthernet 0/5

2. Set port 2 as the source mirrored port:

[Quidway]mirroring-port GigabitEthernet 0/2

The WFilter computer shall be connnected to "port 5", and the firewall is connected to "port 2".

By now, you can monitor all clients internet activity in local network.

Links

• How to check whether port mirroring is properly configured?
• When to add a blocking adapter?
• Blocking UDP in pass-by deployment
• Homepage of WFilter Deployment